England Ireland Find Havens
England Ireland Find Routes
Boat
Maintenance
Comfort
Handling
Safety
Other



Next Previous

Enlarging an existing round hole



Be the first
to comment

What is the issue?
Enlarging an existing round hole can present a challenge. Round holes are typically cut out by a hole-saw mounted on a drill. However, a pre-existing hole lacks the infill for the piloting bit to centre the saw blade. This makes it impossible to use a hole-saw to cut enlargements.

Why address this?
We often cut holes too small, as well as too large, and an effective approach to enlarge holes will pay dividends when the problem is encountered.

How to address this?
Wedge a piece of wood tightly into the hole and press in until flush with the surface. Use the inserted peg as the guide for the hole-saws bit to cut out the new enlarged hole.



A tight-fitting wine cork can work perfectly fine to act as a fixing point for a hole-saw's piloting bit.



With thanks to:
Michael Harpur, Yacht Obsession, with thanks to Toy Gibson.
A photograph is worth a thousand words. We are always looking for bright sunny photographs that illustrate this experience. If you have some images that we could use please upload them here. All we need to know is how you would like to be credited for your work and a brief description of the image if it is not readily apparent. If you would like us to add a hyperlink from the image that goes back to your site please include the desired link and we will be delighted to that for you.



Add your review or comment:

Please log in to leave a review of this tip.

eOceanic makes no guarantee of the validity of this information, you must read our legal page. However, we ask you to help us increase accuracy. If you spot an inaccuracy or an omission on this page please contact us and we will be delighted to rectify it. Don't forget to help us by sharing your own experience.