England Ireland Find Havens
England Ireland Find Routes
Boat
Maintenance
Comfort
Operations
Safety
Other



Next Previous

Removing stripes and stickers from boats



Be the first
to comment

What is the issue?
Boat stripes and stickers tend to degrade and look bad in time. Although they can be removed and replaced it is not easy to get the originals off.

Why address this?
Stripes in poor condition look bad and need to be removed or replaced. Although the above approach is effective it runs the risk of overheating the gel coat and scratching it with the chisel.

How to address this?
The usual approach is to heat the stickers with a hairdryer as shown below. However, when dealing with a sensitive gel coat it is easy to burn it with a hairdryer.

However, a domestic wallpaper steam stripper has enough heat to address the sticker without damaging the gel coat, especially so if used outside where the heat can dissipate quickly and it is not held in one location for too long. The stickers lift and crack under the steam. Glue remover can be used afterwards to take away any residual glue.

With thanks to:
Michael Harpur, Yacht Obsession




Removing a sticker from motorcycle tank with a hairdryer



Removing decals with a steamer


A photograph is worth a thousand words. We are always looking for bright sunny photographs that illustrate this experience. If you have some images that we could use please upload them here. All we need to know is how you would like to be credited for your work and a brief description of the image if it is not readily apparent. If you would like us to add a hyperlink from the image that goes back to your site please include the desired link and we will be delighted to that for you.



Add your review or comment:

Please log in to leave a review of this tip.

eOceanic makes no guarantee of the validity of this information, you must read our legal page. However, we ask you to help us increase accuracy. If you spot an inaccuracy or an omission on this page please contact us and we will be delighted to rectify it. Don't forget to help us by sharing your own experience.