England Ireland Find Havens
England Ireland Find Routes
Boat
Maintenance
Comfort
Operations
Safety
Other



Next Previous

A simple means to connect to lines and cables to support a parallel load




Be the first
to comment

What is the issue?
Connecting to a cable or line and supporting a parallel load is not an easy task and few knots can do it without slipping down the line.

Why address this?
A facility to do this would be most convenient, particularly whilst working aloft in the rigging as a quick safety point. A method of accomplishing this will find 101 uses in general practice aboard a yacht.

How to address this?
Have some loops made up and turn them into a sturdy 'loop strop' to enable quick and easy direct connection to lines and cables as below.




I was introduced to this technique when lifting replacement cap shrouds and a head stay in New Zealand. My first approach was to place the halyard through the eye of the shrouds and then hoist it aloft. This made it very difficult above as the halyard had to be undone from the eye to insert the clevis pin. The result was I had to hold the unsupported weight of the shroud whilst swinging in the bosuns' chair trying to position it. This was less than ideal.

Watching me work this way the boatyard owner brought out his strop and attached it to the next shroud about a metre from the top. This made the task a breeze as the eye was now free to drop in place with the shroud's weight resting on the halyard.

After that, we got some loops for strops and used it occasionally to attach to a tiller without fixings, plus as a safety connection anchor point when aloft. We found it useful to connect to a sheet when it was jammed solid in a riding turn on the winch. We wrapped it tight around the sheet and pulling from an adjacent block to take the load off the riding turn.

With thanks to:
Michael Harpur, Yacht Obsession.
A photograph is worth a thousand words. We are always looking for bright sunny photographs that illustrate this experience. If you have some images that we could use please upload them here. All we need to know is how you would like to be credited for your work and a brief description of the image if it is not readily apparent. If you would like us to add a hyperlink from the image that goes back to your site please include the desired link and we will be delighted to that for you.



Add your review or comment:

Please log in to leave a review of this tip.

eOceanic makes no guarantee of the validity of this information, you must read our legal page. However, we ask you to help us increase accuracy. If you spot an inaccuracy or an omission on this page please contact us and we will be delighted to rectify it. Don't forget to help us by sharing your own experience.