England Ireland Find Havens
England Ireland Find Routes
Boat
Maintenance
Comfort
Handling
Safety
Other

NextPrevious

Dealing with the three different GPS conventions for describing a waypoint


Be the first to comment

What is the issue?
GPS has forever transformed the art of navigation, but there are sublties of expressing a position that need to be understood. There are three different GPS conventions for describing a waypoint, it is imperative for accuracy of position that you understand which convention you are using aboard and format of information you are being provided from external sources.

Why address this?
Accuracy of position is an important discipline when it comes to staying off rocks.

How to address this?
Be aware of the expressions of position, standardise on the maritime approach and have a feel for the distances involved.

Here are the three conventions:

1. degrees, minutes and seconds (d m s)
2. degrees, minutes and decimal minutes (d m.m)
3. degrees, decimal degrees (d.d)

The maritime convention for expressing a position is degrees, minutes and decimal minutes (d m.m). You should select this as your standard.

Most GPS offer a choice of Lat/Lon expressions you should check the one your GPS is set up for and set your preference.

When navigating check what standard is being utilised when utilising external data sources. It should be clear in the way it is expressed. Please be particularly careful when working with charts as charts vary and can often use degrees, minutes and seconds (d m s). So if taking positions from charts you will need to convert it.


How to convert seconds into decimal

To convert seconds into decimal minutes, divide the seconds by 60. For instance if you have 52 deg. 38 min 17 sec. N converts to a GPS expression of 52 38.283 (devide the 17 by 60 to get 0.283 minute). Most GPS express degrees of latitude in only two digits as the highest latitude you can have is 90 degrees. Incidentally an easy way to remember that the horizontal lines on a nautical chart are parallels of latitude is to remember this ‘’Lat is Flat’’.


How to convert decimal minutes into seconds

To convert decimal minutes into seconds simply multiply the fraction of a minute by 60. 52 38.283 then becomes 52 deg. 38 min 17 sec again (well not perfectly so if you multiply .283 by 60 you actually get 16.98, this slight difference is a result of having only three digits to work with so some of the detail is lost in the first conversion, however it rounds to 17 seconds).


How to convert degrees, minutes and seconds into decimal degrees.

To convert degrees, minutes and seconds to decimal degrees, you divide minutes by 60, seconds by 3600, add to the degrees (degrees + minutes/60 + seconds/3600). Latitudes run from -90.00 degrees at the South pole to 90.0 degrees at the North pole. Longitudes run from -180.00 degrees to 180.00 degrees. West longitudes (locations West of the Greenwich meridian) are positive while East longitudes (locations East of the Greenwich meridian) are negative. Decimal degrees are not used very often in a maritime context; it is mostly for land based positions or in a computing context.


Scale and decimal minutes

Finally GPS accuracy can be very precise. Most people use degrees, minutes and three decimals of a minute which is very detailed. It is worthwhile to make these figures real so you can have a feel for that level of detail.

If we leave aside longitude, as the further from the equator you travel the shorter they become, and use latitude the most a minute can be is a nautical mile. There are 6,076 feet in a nautical mile. So in short the first digit, after the decimal is a tenth representing = 607 feet. The next digit is one hundredth = 60 feet and the third digit a thousand = 6 feet. So the three digit level of precision is extreme.

With thanks to:
Michael Harpur, Yacht Obsession.

Print this tip

Add your review or comment:

Please log in to leave a review of this tip.

eOceanic makes no guarantee of the validity of this information, you must read our legal page. However, we ask you to help us increase accuracy. If you spot an inaccuracy or an omission on this page please contact us and we will be delighted to rectify it. Don't forget to help us by sharing your own experience.