What is the issue?
Modern yachts tend to have lifting sole boards right up against vertical surfaces. In time these boards tend to swell and jam so they have to be yanked out. As this happens they strike and scratch the adjacent surfaces.Why address this?
In addition to being frustrating, this type of conspicuous wear will look poor and devalue the vessel.Sail with the Instincts of a Local Pro
Navigation apps only get you from A to B, leaving you guessing about the "where," the "why," and the "how." eOceanic isn't another "nav app." It's the Intelligence Uplift that enhances the tools you already use, powering up both your capabilities and understanding.
Once activated on your device, it doesn't just display data, it brings it to life with real-time situational awareness, giving you a "digital sixth sense" for the coastline.
Go beyond navigation to truly know the coast and everything it offers.
- Sail Stress-Free: Make boat handling easier with a helpful assistant and avoid "hidden" hazards with an extra set of eyes on watch for dangers along the coast.
- Discover More: Most sailors only experience a small fraction of a coastline's rewards. We unlock the "hidden gems" and local resources that create unforgettable experiences for you, your family, and your friends.
- Engage Ashore: We don't stop at the waterline; we bring you in to fully experience the best of the world waiting for you ashore.
The power of knowing. Autonomy, agency, agility and the joy of roaming free.
How to address this?
If you have a sticking sole board it may be easily remedied by putting a slight bevel, or taper, around the lower edge of the lifting board. This can easily be carried out by an electric plane or failing that an electric sander. After the taper has been formed the sole board will never jam again.
Beveled lifting sole boardDrawing: Tony Gibson
If some rearrangement is being carried out on the cabin floor it may be worth taking the opportunity to place a margin board around the lifting sole board so as to reduce its size and keep it clear of the surrounding surfaces.
Sole board with a border acting as a spacerDrawing: Tony Gibson
It is difficult to beat the 'keep it simple' method of providing a hole(s) through the lifting sole board for pulling the board up. However, in certain positions, they could allow small objects to fall through which may block a bilge pump. So it is advisable to use flush mounted ring pulls if possible.
Flush mount, ring pull, inset handlesPhoto: Michael Harpur
With thanks to:
Michael Harpur, Yacht Obsession. Header image with thanks to Catalina Projects.
A photograph is worth a thousand words. We are always looking for bright sunny photographs that illustrate this experience. If you have some images that we could use please upload them here. All we need to know is how you would like to be credited for your work and a brief description of the image if it is not readily apparent. If you would like us to add a hyperlink from the image that goes back to your site please include the desired link and we will be delighted to that for you.
Add your review or comment:
Please log in to leave a review of this tip.
eOceanic makes no guarantee of the validity of this information, you must read our legal page. However, we ask you to help us increase accuracy. If you spot an inaccuracy or an omission on this page please contact us and we will be delighted to rectify it. Don't forget to help us by sharing your own experience.